How to Check Power Steering Fluid

To check the power steering fluid:

1. Turn the key off and let the engine compartment cool down.

2. Wipe the cap and the top of the reservoir clean.

3. Unscrew the cap and wipe the dipstick with a clean rag.

4. Replace the cap and completely tighten it.

5. Remove the cap again and look at the fluid level on the dipstick.

The level should be at the FULL COLD mark.

If necessary, add only enough fluid to bring the level up to the mark.

    See also:

    Power Driver Seat
    To adjust a power driver seat, if equipped: . Move the seat forward or rearward by sliding the control forward or rearward. . Raise or lower the front part of the seat cushion by moving the fron ...

    Manual Mode
    Driver Shift Control (DSC) Notice: If you drive the vehicle at a high rpm without upshifting while using Driver Shift Control (DSC), you could damage the vehicle. Always upshift when necessary while ...

    Turning the System On and Off
    The URPA system can be turned on and off using the park assist button located next to the shift lever. The LED next to the park assist button lights up when the system is on and turns off w ...