Passenger Compartment Air Filter

The filter removes dust, pollen, and other airborne irritants from outside air that is pulled into the vehicle.

The filter should be replaced as part of routine scheduled maintenance.

See Scheduled Maintenance  for replacement intervals.

To find out what type of filter to use, see Maintenance Replacement Parts .

The passenger compartment air filter can be accessed by removing the entire glove box.

1. Open the passenger side door.

Remove the end cover located on the side of the instrument panel in the top right corner.

Remove the screw affixed to the side of the glove box.

2. Open the glove box door and remove the attached screws from around the glove box.
3. Lower the loosened glove box housing.
4. Unplug both wire cables and remove the glove box.

5. Pull the three tabs to release and open the filter door.

5. Pull the three tabs to release and open the filter door.

6. Remove the old air filter.

6. Remove the old air filter.
7. Install the new air filter.
8. Reinstall the air filter door.

Re-install the glove box.

See your dealer if additional assistance is needed.

    See also:

    Safety Belt Use During Pregnancy
    Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-sh ...

    Comfort and Convenience
    Select the Comfort and Convenience menu and Chime Volume will be displayed. Chime Volume This allows the selection of the chime volume level. Press the TUNE/MENU knob when Chime Volume is highlight ...

    Additional Factors Affecting System Operation
    Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Saf ...