Hood Release
To open the hood:
1. Pull the hood release handle inside the vehicle. It is located next to the parking brake pedal near the floor.
2. Then go to the front of the vehicle and pull the secondary hood release to the right. The hood latch is located under the hood, near the center, at the front edge of the grille.
3. Hold the latch to the right as you lift up on the hood.
Before closing the hood, be sure all the filler caps are on properly. Then just pull the hood down and close it firmly.
See also:
OnStar®
OnStar® uses several innovative technologies and live
advisors to provide a wide range of safety, security,
navigation, diagnostics, and calling services. ...
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire
(Not Punctured)
To use the air compressor to inflate
a tire with air only and not sealant:
If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
wa ...
Steps for Determining Correct Load Limit
1. Locate the statement “The
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs” on your vehicle's
placard.
2. Determine the combined
weight of the driver an ...