Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and displays a DIC message when it is necessary to change the engine oil and filter. The oil life system should be reset to 100% only following an oil change.
Resetting the Oil Life System
1. Display the OIL LIFE REMAINING on the DIC.
2. Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
See Engine Oil Life System.
See also:
Call Waiting
Call waiting must be supported on the Bluetooth phone and enabled by the wireless
service carrier to work.
Accepting a Call
Turn the TUNE/MENU knob to “Answer” and press TUNE/MENU to accept th ...
Locking Rear Axle
Your vehicle may have this feature. A locking rear
axle can give you additional traction on snow, mud,
ice, sand or gravel. It works like a standard axle
most of the time, but when one of the rear ...
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel up toward
RES/+ and hold it until the
vehicle accelerates to the
desired speed, and then
release it.
• To incre ...
