Emergency Release for Opening Liftgate
1. Remove the trim plug, located on the inside of
the liftgate in the center, to expose the access
hole in the trim panel.
2. Use a tool to reach through the access hole in
the trim panel.
3. Pry the left release lever up to the unlock
position. Pry the right release lever up to
unlatch the liftgate.
4. Reinstall the trim plug.
See also:
Doing Your Own Service Work
WARNING:
You can be injured and the vehicle could be
damaged if you try to do service work on a vehicle
without knowing enough about it.
• Be sure you have sufficient knowledge,
experience, ...
Height Adjustment
Height Adjustment
Press and hold the top or bottom of
the switch to raise or lower the seat.
Release the switch when the
desired height is reached. ...
High-Beam On
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information. ...