Wheels and Trim—Aluminum or Chrome
Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.
Keep the wheels clean using a soft, clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft, clean towel. A wax may then be applied.
Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is
not washed after driving on roads that have been sprayed with magnesium, calcium,
or sodium chloride. These chlorides are used on roads for conditions such as ice
and dust. Always wash the chrome with soap and water after exposure.
Notice: To avoid surface damage, do not use strong soaps, chemicals, abrasive
polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated
wheels. Use only approved cleaners. Also, never drive a vehicle with aluminum or
chrome-plated wheels through an automatic car wash that uses silicone carbide tire
cleaning brushes. Damage could occur and the repairs would not be covered by the
vehicle warranty.
See also:
Cruise Control
The cruise control lets the vehicle maintain a speed of about 40 km/h (25 mph)
or more without keeping your foot on the accelerator. Cruise control does not work
at speeds below 40 km/h (25 mph).
...
When to Inspect the Engine AirCleaner/Filter
Inspect the air cleaner/filter at the Maintenance II
intervals and replace at the first oil change after
each 50,000 mile (83 000 km) interval.
If you are driving in dusty/dirty
conditions, inspec ...
Automatic EPB Release
The EPB will automatically release if the vehicle is running, placed into gear,
and an attempt is made to drive away. Avoid rapid acceleration when the EPB is applied,
to preserve parking brake li ...
