Adding Washer Fluid
Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview for reservoir location.
Notice
- When using concentrated washer fluid, follow the manufacturer's instructions for adding water.
- Do not mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system. Also, water does not clean as well as washer fluid.
- Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid expansion if freezing occurs, which could damage the tank if it is completely full.
- Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint.
See also:
Recommended Fluids andLubricants
Fluids and lubricants identified below by name,
part number, or specification may be obtained from
your dealer.
...
How to Add Coolant to the Radiator
WARNING:
An electric engine cooling fan under the hood can
start up even when the engine is not running and
can cause injury. Keep hands, clothing, and tools
away from any underhood electric fa ...
Lower Anchor and Top Tether
Anchor Locations
Rear Seat
(Top Tether Anchor): Seating
positions with top tether anchors.
(Lower Anchor): Seating
positions with two lower anchors.
To assist in locating the lower
anchors, each rear an ...