Uplevel Headlamp Assembly

The uplevel model vehicle has a high intensity discharge (HID) high/low beam, a dedicated DRL, and a parking/turn signal lamp on the headlamp assembly. See High Intensity Discharge (HID) Lighting for more information.

To replace one of these bulbs:

1. Open the hood. See Hood.

A. DRL Lamp

A. DRL Lamp
B. Parking/Turn Signal Lamp

2. Turn the bulb socket counterclockwise to remove it from the headlamp assembly.

3. Pull the bulb straight out from the socket.

4. Push the new bulb into the socket and reinstall the socket into the headlamp assembly by turning it clockwise.

    See also:

    Different Size Tires and Wheels
    If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its braking, ride and handling characte ...

    Conference Calling
    Conference calling and three-way calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. To start a conference while in a current call: 1. Turn or pre ...

    Trip/Fuel Menu Items
    Press MENU on the turn signal lever until Trip/Fuel Information Menu is displayed. Use to scroll through the following menu items: • Digital Speedometer • Trip 1 • Trip 2 • Power ...