Hood
To open the hood:
1. Pull the interior hood release handle located to the left of the steering column below the instrument panel.
2. Go to the front of the vehicle and push the secondary hood release handle toward the driver side of the vehicle.
3. Lift the hood.
To close the hood:
1. Before closing the hood, be sure all the filler caps are on properly.
2. Lower the hood 30 cm (12 in) above the vehicle and release it so it fully latches. Check to make sure the hood is closed and repeat the process if necessary.
See also:
Sensor
The solar sensor, located on top of
the instrument panel near the
windshield, monitors the solar heat.
The climate control system uses the
sensor information to adjust the
temperature, fan sp ...
Power Windows
The power window switches located on the driver door control all four windows.
Each passenger door has a switch that controls only that window.
Press the switch to lower the window. Pull the fron ...
Managing the Vehicle DamageRepair Process
In the event that your vehicle requires damage
repairs, GM recommends that you take an active
role in its repair. If you have a pre-determined
repair facility of choice, take your vehicle there, or ...