Programming Transmitters to the Vehicle
Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer.
The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Any remaining transmitters will need to be reprogrammed. Each vehicle can have up to five transmitters matched to it.
See also:
Jump Starting (On-board with eAssist Only)
If the vehicle fails to crank, it may
be jump started by using the eAssist
battery to charge the 12-volt battery.
Use the following procedure to
activate the on-board jump start
using the DIC ...
Canceling a Remote Start
To cancel a remote start, do one of the following:
. Aim the RKE transmitter at the vehicle and press and hold
until the parking lamps turn off.
. Turn on the hazard warning flashers.
. Turn t ...
Compass
Compass Operation
There is a compass display in the upper right corner of
the mirror.
Compass Calibration
Press and hold to activate the
compass calibration
mode. CAL displays in the compass ...