Muting a Call

During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them.

To Mute a call

1. Press The system responds “Ready,” followed by a tone.. The system responds “Ready,” followed by a tone.

2. Say “Mute Call.” The system responds “Call muted.”

To Cancel Mute

1. Press The system responds “Ready,” followed by a tone.. The system responds “Ready,” followed by a tone.

2. After the tone, say “Mute Call.” The system responds “Resuming call.”

    See also:

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. The coolant level should be at or above the FULL COLD mark when the engine is cold. The coolant level should be above the ...

    Starting the Vehicle
    1. Aim the RKE transmitter at the vehicle. 2. Press and release . 3. Immediately after completing Step 2, press and hold until the turn signal lamps flash, or for about two seconds if the v ...

    Power Windows
    Power Windows Press the switch to lower the window. Pull the switch up to raise it. The switches work when the ignition is in ON/RUN or ACC/ACCESSORY, or in Retained Accessory Power (RAP). ...