Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the washer symbol on it.
Add washer fluid until the tank is full.
Notice:
• When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
• Do not mix water with ready-to-use washer
fluid. Water can cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system. Also,
water does not clean as well as washer fluid.
• Fill your washer fluid tank only
three-quarters full when it is very cold.
This allows for expansion if freezing occurs, which could damage the tank if it is completely full.
• Do not use engine coolant (antifreeze) in your windshield washer. It can damage your washer system and paint.
See also:
EPB Release
To release the EPB, place the
ignition in the ON/RUN position,
apply and hold the brake pedal, and
push down momentarily on the EPB
switch. If you attempt to release the
EPB without the brak ...
Tire Chains
WARNING
Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle par ...
Instrument Panel
Instrument Panel
A. Exterior Lamp Controls.
Fog Lamps.
Instrument Panel Illumination Control.
B. Air Vents.
C. Turn and Lane Change Lever.
See Turn and Lane-Change Signals.
Driver Information ...