Audio Output

Audio from the DVD player or auxiliary inputs may be heard through the following possible sources:

• Wireless Headphones
• Vehicle Speakers
• Vehicle wired headphone jacks on the Rear

Seat Audio system (if equipped)

The RSE system will always transmit the audio signal by infrared to the wireless headphones, if there is audio available. See “Headphones” previously for more information.

The RSE system is capable of outputting audio to the vehicle speakers by using the radio. The RSE system may be selected as an audio source on the radio if the RSE system power is on.

Once the RSE system is selected as an audio source on the radio, adjust the speaker volume on the radio, if necessary. If the RSE system power is not on, the RSE system will not be an available source on the radio. Refer to the radio information for the radio that your vehicle has for more information.

The RSE system is capable of outputting audio to the wired headphone jacks on the rear seat audio system (if equipped). The RSE system may be selected as an audio source on the rear seat audio system if the RSE system power is on.

    See also:

    Parking Brake
    The vehicle has an Electric Parking Brake (EPB). The switch for the EPB is on the center console. The EPB can always be activated, even if the ignition is off. To prevent draining the battery, avoi ...

    Playing the Radio
    PWR (Power): Press this knob to turn the system on and off. VOL (Volume): Turn this knob clockwise or counterclockwise to increase or to decrease the volume. INFO (Information): When the ...

    Introduction
    GENERAL MOTORS, GM, the GM Emblem, BUICK, the BUICK Emblem, and the name LUCERNE are registered trademarks of General Motors Corporation. This manual describes features that may or may not be ...