Setting the Clock (Radio with CD and Touchscreen)
The clock menu can be only be used with the radio on while in ON/RUN or ACC/ACCESSORY.
To set the time:
1. Press the CONFIG button to enter the menu options or press H. Turn the TUNE/MENU
knob to scroll through the available setup features. Press TUNE/ MENU or press the
Time screen button to display other options within that feature.
2. Press + or − to increase or decrease the Hours and Minutes displayed on the clock.
12/24 HR Format: Press the 12 HR screen button for standard time; press the 24 HR screen button for military time.
Day + or Day −: Press the Day + or Day − display buttons to increase or decrease the day.
Display: Press Display to turn the display of the time on the screen on or off.
See Clock for more information.
See also:
Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and
displays the CHANGE ENGINE OIL SOON message when it is time to change the engine
oil and filter. The oil life system ...
Jump Starting (On-board with eAssist Only)
If the vehicle fails to crank, it may
be jump started by using the eAssist
battery to charge the 12-volt battery.
Use the following procedure to
activate the on-board jump start
using the DIC ...
Using the Delete All Name Tags Command
The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if stored.
To delete all name tags:
1. Press
.
► For vehicles without a navigation sy ...
