Playing from MEM
Playing Back a Previously Recorded CD
Turn the TUNE knob to select a track if MEM is already playing from the previously recorded disc.
1. Select Recorded Disc List.
2. Select the disc.
3. Select the track.
Searching for a Track
Tracks can be searched for by:
• Playlists
• Artists
• Albums
• Song Titles
• Genres
The number of objects in each category is shown in parentheses after the category.
To search for tracks:
1. Turn the Menu knob.
2. Select Search.
3. Select: Playlists, Artists, Albums, Song Titles, or Genres.
4. Select the track. The search rate increases if the Menu knob is continuously turned while searching in a list.
Shuffle Songs
Select the Shuffle Songs option from the MEM menu to randomly play back tracks stored in MEM.
See also:
Erasing Universal Home RemoteButtons
To erase programming from the three Universal
Home Remote buttons do the following:
1. Press and hold down the two outside buttons
until the indicator light begins to flash, after
20 seconds. Do ...
All-Wheel Drive
When to Check Lubricant
It is not necessary to regularly check fluid unless
you suspect there is a leak or you hear an
unusual noise. A fluid loss could indicate a
problem. Have it inspected and r ...
TPMS Malfunction Light and Message
The TPMS will not function properly if one or more of the
TPMS sensors are missing or inoperable. When the
system detects a malfunction, the low tire warning light
flashes for about one minute a ...