DSP (Digital Signal Processing) Settings

Buick LaCrosse / Buick LaCrosse Owners Manual / Infotainment System / Introduction / Operation / DSP (Digital Signal Processing) Settings

For vehicles with DSP, it is used to provide a choice of different listening experiences.

The DSP settings for the radio with CD are:

• normal - Select this setting to adjust the audio for stereo mode. This provides the best sound quality for the driver seat first, with the front passenger second.

• hk surround - Select to enable hk surround. This produces a true 6.1 matrix surround from any two channel digital source.

This feature is not available in AM/FM radio mode.

The DSP settings for the radio with CD/DVD and MEM are:

• 2.0 normal - Select this setting to adjust the audio for stereo mode. This provides the best sound quality for the driver seat first, with the front passenger second.

• hk surround - Select to enable hk surround. This produces a true 6.1 matrix surround from any two channel digital source.

This feature is not available in AM/FM radio mode.

To adjust the DSP settings:

1. Press the TONE button.

2. Select DSP.

3. Select the setting.

Press the back to the Tone Settings menu. BACK button to go back to the Tone Settings menu.

    See also:

    When the System Does Not Seem to Work Properly
    If the URPA system will not activate due to a temporary condition, the message PARK ASSIST OFF will be displayed on the DIC and a red light will be shown on the rear URPA display when the shift ...

    Power Steering Fluid
    When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this ...

    Parking over Things That Burn
    WARNING! Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. ...