Call Waiting

Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier.

► Press to answer an incoming call when another call is active. The original call is placed on hold. to answer an incoming call when another call is active. The original call is placed on hold.

► Press again to return to the original call. again to return to the original call.

► To ignore the incoming call, no action is required.

► Press to disconnect the current call and switch to the call on hold. to disconnect the current call and switch to the call on hold.

    See also:

    Gasoline Octane
    Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, you may notice an audible knocking noise when you drive, commonly referred to as sp ...

    Removing the Flat Tire andInstalling the Spare Tire
    1. If your vehicle has a wheel cap that covers the wheel nuts, position the chisel end of the wheel wrench in the notch and pry it off. 2. Using the wheel wrench, loosen all the wheel nuts. ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard wa ...