Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule for more information.
Replacement blades come in different types and are removed in different ways. For proper type and length, see Maintenance Replacement Parts .
Notice: Allowing the wiper arm to touch the windshield when no wiper blade is
installed could damage the windshield. Any damage that occurs would not be covered
by your warranty. Do not allow the wiper arm to touch the windshield.
To replace the windshield wiper blade:
1. Pull the windshield wiper assembly away from the windshield.
2. Press the button in the middle of the wiper arm connector, and pull the wiper blade away from the arm connector.
3. Remove the wiper blade.
4. Reverse Steps 1 through 3 for wiper blade replacement.
See also:
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS se ...
Three-Way Calling
Three-Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.
1. While on a call press . The
system responds
with “Ready” followed by a ...
Instrument Panel
Instrument Panel
A. Outlet Adjustment.
B. DIC Operation and Displays (If Equipped).
C. Turn Signal/Multifunction Lever.
D. Instrument Panel Cluster.
E. Hazard Warning Flashers.
F. Audio Syst ...